Quarter Sawn Red Oak Wide Plank (Face Grain) Countertop
Safe and Secure
Hardwood Lumber Company specializes in manufacturing quality custom-made wide plank (face grain) countertops and wood countertops. All of our Red Oak Quarter Sawn wood countertops and wood table tops are custom-made to your specifications at our manufacturing facility in Ohio. Custom wide plank countertops are made using random width planks that run the full length of our wide plank (face grain) countertop. Hardwood Lumber Company wide plank (face grain) countertops and wood countertops do not have any butt joints or finger joints. Custom wide plank countertops are made with board face turned up (flat grain). We can make custom Red Oak Quarter Sawn wide plank countertops up to 1-3/4” thick, 84'' wide, and 114" long. Wide plank (face grain) countertops and wood countertops also make great wood desktops and wood table tops. Hardwood Lumber Company wood countertops and wood table tops can be purchased with a Poured Epoxy finish, an Acrylic Polyurethane finish, or a Mineral Oil finish. We offer a choice of clear finish or choose from a large selection of stain color options. We also offer unfinished wood countertops if you decide to finish your own wood countertop or wood table top. We offer custom sink cutouts, custom stove cutouts, or any other custom cuts on all wood countertops we make. Make sure you check out the large selection of edge details we can apply to our wood countertops and wood table tops. Most of our woodworkers are craftsmen from the local Amish community, providing great attention to quality and detail at every step of the manufacturing process. Wood countertops will add warmth to any kitchen or dining room not achievable with other countertop materials.
All wood countertops are custom made to order. All orders revised or cancelled after going into production (within 24 hours after order is received) will have a restocking fee of up to 50%.
If you prefer to have your countertop sanded smooth and have no texture, be sure to select NONE in the Textures Options.
Our Countertops are made with a good top surface and four good sides. This means the bottom surface might have imperfections. Selecting the High-Grade Bottom Surface option allows you to have the bottom surface be the same grade as the top surface and four sides.
Wire Brushed texture works best on wood with an open grain, such as White Oak, Red Oak, and Ash. On other tighter grain wood species the Wire Brushed Texture will not have the same effect and will not be as visible.
Because each piece of wood has its own unique character, grain and color will vary from the sample images shown
Quarter Sawn Red Oak Countertops ship within 1 to 2 weeks, depending on your customization and finish selection.
Quarter Sawn Red Oak
Quarter sawn red oak displays dramatic medullar figure called flake or fleck. The sapwood of red oak is white to light brown and the heartwood is a pinkish reddish brown. Red oak is similar in general appearance to white oak, but with a slightly less pronounced figure due to the smaller rays. Red oak is mostly straight-grained, with a coarse texture. Quarter sawn red oak can be stained with a wide range of finish tones and has great wear-resistance. We use only the higher quality grades of quarter sawn red oak lumber for our products.
The sapwood of red oak is white to light brown and the heartwood is a pinkish reddish brown. red oak is similar in general appearance to white oak, but with a slightly less pronounced figure due to the smaller rays. Red oak is mostly straight-grained, with a coarse texture. Red oak can be stained with a wide range of finish tones and has great wear-resistance. We use only the higher quality grades of red oak lumber for our products.